What Should We Pay Attention To When Using a Thermostatic Waterbath?

What should we pay attention to when using a Thermostatic Waterbath ? This problem may not be considered by most people. However, today, Juno Xiaobian wants to remind everyone that this is also a problem that cannot be ignored. If the thermostatic water tank is used improperly, whether it is for the instrument itself or for testing As a result, there are different degrees of influence. Today, Yunuo Xiaobian shares with you the precautions and maintenance knowledge of the constant temperature water tank:

1. The Electric Heating Thermostatic Waterbath should be added with clean water before use. It is strictly forbidden to heat without liquid to prevent the heating tube from being burnt and damaged.

2. Do not switch the power supply frequently during work to ensure the service life of the heater.

3. The liquid in the constant temperature water tank is dirty and should be replaced in time.

4. If it is not used for a long time, remove the water from the studio water tank, wipe it with a soft cloth and let it dry.

5. It is forbidden to enter various solutions into the control box of the constant temperature water tank to avoid damage to the machine components.

6, the power supply 220V 50Hz, the power supply power should be greater than or equal to the total power of the instrument, and should be properly grounded to avoid accidents. 7. The constant temperature water tank should be placed in a ventilated and dry place to avoid working in a high humidity environment.

8. After use, all switches should be in the off state, unplug the power plug.